Search This Blog

Friday, February 12, 2010

Building Bitx 3 , by the BiTX20 building group at 147.120 Tech Net

If you  want to keep a track of building Bitx Version 3 with the way friends at the 147.120 Tech Net are doing. Then please do visit their blog and see how a group project is being build with club members with test equipments.
They have build the FLL Kit which was start of their project.  Here is the link
http://technet.147120.com/technet/?p=401

The second meeting was to take up Bitx Bandpass Filter. Here is the link to the building and measurement with test instruments.  http://technet.147120.com/technet/

I think the test equipments have not helped them decide the correct capacitor.  We have made many Bitx and found 39 Pf the best value. That has been tested  in practical receiving and transmitting.   Lets see what is the outcome for club in the next meet.

The error in print is regretted . The PCB shows 68Pf but we have advised for 39PF.

All the best friends

Thursday, February 11, 2010

Bitx20 Launch

 The Bitx20 website has been launched after remaining unfinished for a long time. The website will give in more details and comprehensive info regarding Bitx version 3.

Rahul  VU3WJM is working on some mods which should make the Bitx version 3 much more better and the errors presently in documents or schematics should be done away it. We would add some extra features , which we will mention when we have incorporated them in the new pcb's.

Also soon we will put on sale  PCB for LSB/USB change,  Crystal Filter For SSB/CW,Band Pass and Low Pass Filter PCB.   We are waiting for TOKO coils so that we can give complete kits for Bandpass and Lowpass Filters.


New items will be placed on Bitx20 site  soon, so keep a watch on the site http://www.bitx20.com.
If you have any suggestions for the website then kindly do email your suggestions.

I would like to give a special thanks to all my friends who have visited bitx20 site and left their kind
comments in the guest book :)   Very much appreciated.

Best of 73s

Wednesday, February 10, 2010

Bitx Version 3 For 20 ,40 And 80 Mt Bands By Ross Bell VK3BEL

 
Bandpass Filter PCB


Low Pass Filter PCB And LSB /USB PCB

Our Australian friend Om Ross Bell VK3BEL is doing wonders with Bitx Version 3.

Ross likes keeping his Bitx simple and as original design, that is without a digital readout.

Ross has successfully made the Bitx for 3 Bands presently that are 20 and 40  and 80 Mt Bands, with modules provided by us for LSB/USB Change, which is a small pcb mounted above the Bitx Main Pcb BFO.

The second PCB is the Bandpass Filter, that is made for 2 Bands and additional PCB can be added for extra bands.
The third PCB is for the LPF also for 2 Bands.

We also have a PCB for using in Crystal Filter that can be used for Changing Filter For suitable use, ie CW.

We are publishing pictures and statement on Bitx  Version 3 for 3 Bands use as per Ross Bell.

Suggestions And Comments as per OM Ross Bell VK3BEL 

The bandpass coils were all wound with #39 wire on the same as the
20mtr coils supplied, a fiddly job.
for 40 mtrs 18 turns / 3 turns with the capacitance values being 82p
in parallel and 8.2p in series with the coils.
for 80 mtrs 21 turns / 4 turns with the capacitance values being 270p
in parallel and 22p in series with the coils.
For the VFO ,I multi tapped the tuning inductor for the required
2.7-3mhz ,4-4.5mhz and 6.2-6.5mhz,  75, 51 and about 28 turns for all
the bands.
To set up the bandpass filters, i connected them with coax to a
receiver and tuned the coils for maximum signal on the required bands,
only a small adjustment was needed after installing in the bitx.
It is great to have 3 bands, always a signal.....
great fun...
Thank you...


Hi,
I replaced all vfo caps with npo's , waxed the coils to the pcb and
also found the replacement of the zener with a 3 terminal regulator to
be much better frequency stability.I also placed a copper shield
around the vfo and the stability is good. I use the set all the time
and plan to go portable soon. all three bands are working well.

************************************************************************************

Well we thank Ross Bell for his Bitx Version 3 operating on three bands and wish Ross all the best for his Bitx version 3 for other bands too. :)  Cheers!

ALL DUE CREDIT TO OM TONY FROM UK FOR PROVIDING DESIGN FOR BITX ADD ON MODULES

Friday, January 29, 2010

Adjustments for S.Meter


     
Adjustments For S.Meter For Bitx  As sent by 
I0VBR Vittorio Bruni

  1. Solder all components to PCB
  2. Connect Potentiometer 470K to Audio in Bitx Volume Control. 10K
  3. Disconnect Antenna to regulate the adjustment for Potentiometer 470K, to Zero for
least deviation of the needle of the meter. It needs to regulate to the position where the needle extends as soon as to move itself
Finally connect antenna and adjust 100K Pot to S9 on a strong signal of 50uv to the antenna entrance

Thursday, January 21, 2010

Bitx 3 Mono Bander 7 & 14 Mhz By Om Ross Bell VK3BEL

We have our latest Bitx Version 3  pictures coming from Australia sent by OM Ross Bell VK3BEL .
Ross has done an extreme good job in making the Bitx 3 for 2 bands 7 and 14 Mhz and he plans to make
it for 3.5 Mhz also . Ross had purchased the Bandpass  and low pass PCB from us and he is the first one
to use them . As more details come in from Ross I will keep posting for all friends.

Ross has already had a few contacts with his Bitx. He has some drift but that would be solved by using NPO capacitors in VFO.

Here are the pictures of Bitx Version 3 By OM Ross Bell VK3BEL

Great Looks 

 
Smart Building

 

 

Its Here Bitx 3 Mono Bander 7 & 14 Mhz

Wednesday, January 20, 2010

Bitx Version 3 New Look . Build By Om Ron Nesler W4DNQ

After getting the case made for Bitx Version 3 and  shipping some case's world wide , now we have some great pictures being sent by our friends.

These  pictures are  sent by Om Ron Nesler W4DNQ with Bitx Version 3 in the case shipped by us.

We thank Ron for being kind to share his pictures and we also compliment him for making the Bitx 3 in such a short time.

Ron has made use of   DDS by N3ZI Kits.  It looks great. Ron is still working on the RF Gain and Filters which he plans to install soon.


          PICTURES OF RON NESLER'S  BITX  VERSION 3




                                        Bitx Version 3  Build By  Om Ron Nesler W4DNQ

 

Inside View Of Bitx Version 3 . Great Construction.

 

                                          Inside View Bitx Version 3 . Close View

 
 Bitx 3 Case has a Fan. S.Meter,LCD Display and Speaker Mounting facilities.

 
                Bitx Version 3 look . Fan.BNC.On/OFF Switch.Morse Key Provision.

 
              Bitx Version 3 In A New Look : )   RON NESLER W4DNQ  BITX 3

More interesting news  will be coming in, as some club's are making the Bitx 3 as club project.

I will update on these news soon.

Best of 73's

VU3SUA

Sunday, January 17, 2010

Bitx Version 3 Case Pictures

Pictures of the Bitx Version 3 Case are being published here to give a better idea how the case looks like.
The case in in metal G.I and in a combo color combination and complete single color grey will also be available.



 


 

 

 

 

 

 


Featured Post

   My Journey with Amateur Radio: Sunil Lakhani (VU3SUA) Shares His Story Hello, fellow radio enthusiasts! This is Sunil Lakhani, also known...