Search This Blog

Monday, September 12, 2016

Bitx 40Mt Boards On Our Ebay Store.

An article was written earlier on this blog regarding hacking bitx20mt for 40mt band.

We had also mentioned that new boards were being made for the Bitx 40mt band. There are very minor changes in the boards, only the major changes being in winding new coils for the Linear Amp, there has been no other change in components. If one was to build the Bitx40t then our article hacking bitx20mt for 40mt band. would be very useful in this regards.

Here are the boards that are available on our Ebay Store Fusion Radio VU3SUA

                      Bitx Version 3B Exciter And PA Board On Fusion Radio VU3SUA Store

The advantage of building our Bitx Kits is that you can purchase the kits in parts. After purchasing the boards if you are missing on parts you could purchase the Bitx Components Kit and later on when you have completed the boards, then you could box them in our various color Bitx Case which are specific made for our kits. 

We shall be publishing some pictures very soon of our new Bitx Case which has been colored in Pepsi Blue And White color.

I will be back soon with more news, enjoy building your Bitx qrp tcvr

best of 73s
Sunil VU3SUA

 

Friday, September 9, 2016

About Hams And Our Present And Future Association

"Who are Hams And How are we associated with their activity" ........ The following article explains this.

Hams are people from different walks of life, a Ham's may be a Lawyer, some may be bankers,business men, student,teacher,pilot,scientist,gardener, you name it,in every field of life, there is a Ham enthusiast, It is not necessary to have a formal degree to get a ham radio license, to enjoy the hobby of Amateur Radio.

Hams generate credit of applause by helping, and  providing emergency communications in distress, no matter where the location is.

In the USA ham radio is promoted in Unique ways. You can donate any amateur radio equipment and get concessions on income tax.

Many counties have govt sponsored organisations to fund Ham Radio activities.

Our activity concerns developing Ham Radio kits that are used by Hams around the world. our Aim is to develop  high quality, reliable and affordable Ham Radio equipment's.

We invite Hams to collaborate with us with their own designs and work with us as partners.

We can develop the kits on designs by Hams interested in earning some money for their work and  efforts.

Many Hams have made blogs and websites with projects, but do not reap enough reward's for their efforts, in this direction we invite budding designers to get paid for their effort and collaborating with us in developing new generation kits and providing them to the global community.

kindly send your email to us with your projects and ideas and how you would like to get associated with us in developing the new generation kits for Ham Radio Hobby for the benefit of all.

Thursday, September 8, 2016

Bitx3C SBL1 In Black Case

Quite some time back I had built a Bitx3C SBL-1 with a DDS. Now this DDS has a S.Meter and can be used for 3 bands. presently this rig is for 20mt only using the SBL-1 mixers.
Performance has been great with many contacts been made.

This new DDS will be offered with the Bitx Kits starting this month.
Here are some pictures which I had taken for the Bitx3C SBL-1


Bitx3C SSB TCVR 6 WATTS SSB

BITX3C EXCITER-DDS-AGC 
                             
BITX3C VIEW EXCITER,DDS,AGC,AM AND PA

BITX3C PA 

BITX3C RAER SIDE 

BITX3C FRONT 


Tuesday, August 9, 2016

NEW BITX AGC Adjustments Updates

Lately many Hams who purchased the AGC kit with our Bitx Kit were having some problem in adjusting the
VU meter to get a deflection. After observing the problem sometimes at my end too i decided to study what would be the correct sequence to set the VU meter.

The setting of 2 trimmers R3A And R5 were found determining the initial settings of the VU meter.
After doing some adjustments with R3A And R5 the correct settings were found as to my way, there can be other ways too.

Below I have provided a silkscreen picture of AGC and short notes to be followed in sequence.
I hope this should help many struggling with setting their meter to move and complete their AGC.

Any one can contact to me if he find still his AGC is not working.

Now Please follow the setting of AGC Meter as below.


AGC ADJUSTMENTS UPDATED

First disconnect antenna from the transceiver or any receiver being used with the AGC module.Also switch the AGC module off from the power source.

 Now follow the steps below in sequence to adjust the AGC settings below:

 STEP 1:
Set point A and B as shown in Fig 1:  AGC silkscreen with trimmer R5 (5K) to 4.9k by tuning the trimmer anti clockwise, use any DMM for this setting. The multi meter leads to be connected between point A and B. We need more adjustment with this trimmer later on. Steps to be followed in sequence leave it at this setting for now.



 STEP 2:
Set point C and D as shown in Fig 1: with trimmer R3A 50K to ZERO 0 ohms by tuning the trimmer clockwise,
 use any DMM for this setting. The multi meter leads to be connected between point C and D, we need more adjustment with this trimmer later in steps to be followed in sequence.



 STEP 3:

Now connect +12 Volts power to AGC, and adjust trimmer R4 (50K)
To get 4V at IC LM324 PIN 3.  Power off the AGC, we shall switch power on later.


 STEP 4:

Now connect meter pads positive and negative as indicated in the Fig 1:
Silkscreen Layout of AGC with wire’s to the VU Meter negative and positive terminals.


 STEP 5:

Now as the meter is connected with the AGC circuit, power on the AGC,As the AGC is powered the meter will now show full scale deflection towards forward even crossing the scale, now adjust trimmer R3A (50K) so that the meter is within the scale limits to the maximum possible.



           The meter is at max forward position

 STEP 6:

Now adjust R5 (5K ) to get meter to show near to zero reading on the meter, but not   absolute zero reading, this setting can be adjusted later to see how the meter responds to a signal. If you see a slack movement move the setting above a bit zero. This can be tried with trail and error to see at which point the meter is excited best.

                 



The meter setting has been bought near to zero with adjusting R5 (5)

                                                Optimum Zero position for VU meter set


STEP 7:

Now is the time to connect the antenna to your set, tune for a strong signal and adjustR3A (50K) to show Full Scale meter reading.



 STEP 8:

Now adjust AGC level with R7 (2.2K) for a Comfortable Audio.


 STEP 9:

Finally Adjust R3 (10K) for VU Meter movement NOT to jump, but show rather
Steady levels.


 AND THAT’S IT ………





Thursday, July 14, 2016

All About Bitx Version 3 Series.

Lately I have been asked about our Bitx 3 series transceivers if they are for single band or multi band and what difference our Bitx Kits have between our various versions.

Here is a question I received recently from one of our Radio Amateur member by email.

Hello.
I am looking for the latest model of the Bitx that can work digital modes.
I must admit, I an unable to understand what are the Bitx's versions: Is it a single band QRP TRC, or is it multiplicand TRC with LIN Amp, and what is the latest model.

73
 Mike
 4X1LM


Our Answer to the questions:

The Bitx version 3 series transceivers  we are selling are all mono banders i.e. single band ssb qrp tcvr. 

The First Bitx kit we started was "Bitx Version 3" ;From the original design of OM Ashar Farhan, Bitx20, further with minor modifications,which were done by Om Rahul Srivatava VU3WJM. 

Later we came out with some new versions Bitx3B Bitx3C with mods done by us. 

1. Bitx3B this version has some changes like the VFO is now controlled and integrated with the famous IK3OIL FLL.  So the VFO is now with varactor control tuning, using 1sv149 varactor diode, which can cover 350KHZ. The mic amp has an extra pre amplifier added. 

Some minor changes were done in PA switching TX RX; overall it has been improved upon the older Bitx Ver 3. The Ver 3B also uses the Diode Ring Mixers and Toroids, in the product detector and mixer.

2. We have Bitx version 3C, which are in two versions.

a. Bitx3C using ADE-1 Mixers.

b. Bitx3C using SBL-1 Mixers.

Other features are same as Bitx3B.


3. AGC and Audio Mute stages have been added in Bitx3b Bitx3c 

For digital modes you can use the Bitx3C SBL-1 or Bitx3C with ADE-1 mixers.

Hope I have been able to clear your doubts.



Saturday, July 2, 2016

Error In CD files sent with Bitx3B kit

Lately we had started offering CD instead of printed documents for Bitx series constructional manuals.
Some how the CD sent had docs with some missing pictures in the file bitx3b construction manual, we
regret that, we are trying to offer the printed documents again so that the mistake does not occur again.

Most of the Bitx3B files can be found on the Bitx Yahoo Forum too.
This link below is okay and the documents seem to be good.

https://app.box.com/s/6g5rj15kgpft1mqxkg7h

Very soon we would work on making all files online with fully correct manuals.

best of 73s

Featured Post

   My Journey with Amateur Radio: Sunil Lakhani (VU3SUA) Shares His Story Hello, fellow radio enthusiasts! This is Sunil Lakhani, also known...