Search This Blog

Showing posts with label Bitx Version 3 By Mark MC Nabb KF7NCF. Show all posts
Showing posts with label Bitx Version 3 By Mark MC Nabb KF7NCF. Show all posts

Saturday, April 2, 2011

MARKS BITX VERSION 3 WITH NPO VFO

Our friend Mark MC Nabb   KF7NCF, has developed a VFO coil that uses NPO tuning.
Mark has build his Bitx version 3 using the NPO COIL .

The details for making a case and NPO as per Marks calculations is given here:

v  The main thing needed will be the aluminum box.  Can you obtain square aluminum
tubing?  I used 1-3/4" square with 1/8" walls but I think we could go
up to 2 or 2-1/2"  without taking up too much space.  

v  The coil form can be  just some plastic tube I had laying around.  It could also just be
a paper wrapped in a circle and then coated with varnish, lacquer, or shellac.

v   The shaft could be any 1/4" plastic rod.  The carrier and
carrier locator strips will just be 1/4" or so plastic sheet.  All
assembly (mounting strips, the ferrite bead, etc) will be done with
hot melt glue.

v  We thank Mark for making this design and we may come up with a small kit that may fit

Inside the Bitx Case.


            
PICTURES OF MARKS BITX WITH NPO VFO    






 

                
                                        

Featured Post

   My Journey with Amateur Radio: Sunil Lakhani (VU3SUA) Shares His Story Hello, fellow radio enthusiasts! This is Sunil Lakhani, also known...