Showing posts from October 25, 2009


A new group BITX has been created on Facebook by Om Stanley Grixti 9H1LO from

Here is the link, if you wish to join and share about Bitx

All the best


Sunil Lakhani


Keyer,Soundcard and AGC details for Bitx Version 3

DG1NPJ Juergen Pfeifer From Germany has sent us information for the AGC, CW Keyer and Soundcard details that he has incorporated in his Bitx Version 3. Here are the details so that it would help all members in constructing these mods for the Bitx.

Contents of Email from  DG1NPJ Juergen Pfeifer From Germany

Hi Sunil,
the CW Modul i have found by Google looking for schematics of Bitx20, it works, but the Audio Output is to small, i will  fix this bug in the next days.
the AGC schematic is from the Bitx Yahoo Group, the Soundcard Interface is a old schematic, it works on all my TRX in my shack. The Pic Keyer i have found on this webpage:
For the AGC/Keyer and CW Modul i send you a PCB Layout, not the best but for me is good.

The connect of the FLL VFO is on my Bitx  Q6 Emitter  ( no Transitor) to Condensor Basis of Q7.
It works great wenn you make the coil L1 in VFO with 50 Turns (Frequency 14.065 to 14.350 MHz )
for CW i put a Resistor wit…

Presenting Pictures of Bitx 3 From Germany

Bitx Version 3 with :


Yes all this from our very proud Ham from Germany

DG1NPJ       Juergen Pfeifer

The Beautiful pictures of the new Bitx 3 from Germany

WOW!!! Bitx Version 3 QRV from Germany

The Bitx Version 3 is now QRV from Germany and the proud Radio Amateur is our Bitx Club members Om
Juergen Pfeifer  DG1NPJ

It is really amazing to see what a beautiful construction our friend Juergen has done with Bitx Version 3, and he has had many successful contacts with Bitx Version3. 
 We wish you many many Dx with your Bitx 3 Om Juergen Pfeifer  DG1NPJ

I am presenting here the comments by our frined DG1NJP

Cq Bitx Site

Hi all Bitx Version 3 enthusiast and kit builders.  It has been now quite a long journey since 2002 when the Cq Bitx Blog was published. The Moto was to provide update on activities of the Bitx Version 3 Kit and start providing PCB and Coils for the Bitx.

The aim has been achieved quite satisfactorily as close to one thousand Bitx Pcb and Kits have been shipped to members from this site and my Ebay shop.

I do agree my site is a bit difficult to navigate and at times confusing.There are many reasons for this. First of all I am not a good website developer, hi hi.    Secondly many kits I introduced found a way on cqbitx blog, because most of the kits are add one for Bitx, but some kits are quite different from the Bitx, like the Bingo or Avala.   But most of my old customers do know that I sell all these also. New persons on my site are sometimes confused to see so many different items and I do agree.

I will be improving on this site to make it better for navigation .  I would invite fe…