Bitx Version 3 Receiving

Published here are a few videos that show the Bitx Version 3 in receiving mode for 20mt band.

The Bitx version 3 that has been made is with no modifications at all and is made as  details and parts
provided in the kit. I have used Steroflex Capacitors in the VFO.

The Freq counter used is the DL4YHF Design . The set is quite stable with not much of drift at all.

The RX works great with strong signals being heard. The band conditions also seem to be quite
good and lot of DX stations can be heard.

The set tunes the complete band from 14.000 MHZ to 14.350 MHZ

I hope the video will give ample view to show that the Bitx Version 3 Kit works as one of the best
and easy designs for Hams world wide building the Bitx 3 .

                                         
 BITX VER 3 DEMO  RX ON 20MT BAND

                                          

 BITX VER 3 DEMO  RX ON 20MT BAND

                                         
  BITX VER 3 DEMO  RX ON 20MT BAND




Thanks

DE VU3SUA

Sunil Lakhani

BitX20 V.3 with the FLL Frequency Counter

The Bitx VFO works quite stable with the FLL connected with it. We have a video which has been shared
by OM JOY/YB0NSI

Here is what Joy has to say regarding his FLL and Bitx.


Hi Sunil, the FLL seems to work FB..Thanks..JOY/YB0NSI

Comments on You Tube By Joy

"With the FLL, the BitX20 is quite stable.. Working DX with 9M2NZI in Johor, West Malaysia, about 1000 Km away from my QTH..PEP is about 3W using a 50K Yaesu dynamic mic and a Mic Amp..The FLL works FB and is available from Sunil..The whole QSO is about 5 minutes and the TX/RX frequency barely move..The Antenna is a single element monoband rotary dipole about 25 meters (75 ft) from the ground..Thanks OM Nazri for the great QSO..73 "

                                                BITX VER 3 WITH FLL CONNECTED

Thanks Joy your Bitx and FLL is doing a Fine Job.

Thanks and best of 73s

DE VU3SUA

Sunil Lakhani