Search This Blog

Monday, July 25, 2011

Frequency Counter 50 Mhz DL4YHF

We had changed the Printed Circuit Board design of the Frequency Counter as by DL4YHF .
The manual we furnish with the kit has details as given by DL4YHF.

Only one extra FND and 10uh RFC have been added . The RFC can be omitted if it gives any false reading
by placing a jumper across.

We are publishing a picture of Freq Counter Build by one of our friends who purchased the kit.




               FREQUENCY COUNTER BUILD :  DESIGN DL4YHF 

Sunday, May 1, 2011

New Bitx Version 3 PCB Set

New Stock of Bitx Version 3 PCB are available .

The Linear Cum Power Supply Module PCB  has now a Filter in place for increasing the RF out put above 5 watts in the IRF 510 stage. The details can be found out in the Yahoo Bitx Forum

PICTURES  OF  NEW  BITX  VERSION 3 PCB






Saturday, April 2, 2011

MARKS BITX VERSION 3 WITH NPO VFO

Our friend Mark MC Nabb   KF7NCF, has developed a VFO coil that uses NPO tuning.
Mark has build his Bitx version 3 using the NPO COIL .

The details for making a case and NPO as per Marks calculations is given here:

v  The main thing needed will be the aluminum box.  Can you obtain square aluminum
tubing?  I used 1-3/4" square with 1/8" walls but I think we could go
up to 2 or 2-1/2"  without taking up too much space.  

v  The coil form can be  just some plastic tube I had laying around.  It could also just be
a paper wrapped in a circle and then coated with varnish, lacquer, or shellac.

v   The shaft could be any 1/4" plastic rod.  The carrier and
carrier locator strips will just be 1/4" or so plastic sheet.  All
assembly (mounting strips, the ferrite bead, etc) will be done with
hot melt glue.

v  We thank Mark for making this design and we may come up with a small kit that may fit

Inside the Bitx Case.


            
PICTURES OF MARKS BITX WITH NPO VFO    






 

                
                                        

Thursday, March 3, 2011

Bitx Multi Band By Om Gabadola from ITALY

The Bitx Multi Band as by G6LBQ is picking up interest among Radio Amateurs as its very easy to build . The ADE-1 Mixer does away with winding coils and MC1350 makes a splendid IF.


Our Friend from Italy Om Gabadola  IZ1NEO   has made his Bitx Multi Band and we are publishing the pictures of his project.


The G6LBQ Multi Band Kit is being worked out and should be available soon for sale.





Tuesday, December 28, 2010

New Frequency Counter DL4YHF



The new Frequency Counter based on the design of DL4YHF is ready.
This Frequency Counter offers following advantages.
  • Easy Mounting on Front Panel
  • Less Space Required on Panel.
  •  2 Part Construction.
  • Easy  Construction








The Counter is ready for sale. If you buy a Freq Counter in the Buy buttons below.. then  just mention this counter New Counter 2 PCB set with your oder. Colours available Green and Red.

Wednesday, December 8, 2010

New Website Amateur Radio Kits.In

                                                                                                                                                                         
In an effort to provide you a better shopping for our kits we have launched a new website that will inform you of our latest products and also inform you of the Ham Radio projects that are popular and being made by Radio Amateurs worldwide.
 
Here is the link to our new website: http://amateurradiokits.in/
 

Featured Post

   My Journey with Amateur Radio: Sunil Lakhani (VU3SUA) Shares His Story Hello, fellow radio enthusiasts! This is Sunil Lakhani, also known...