Payment Options and Distributors for Bitx Kits

Presently we are having problem with Paypal.

We have other options which are listed below:

1. Alertpay.  http://alertpay.com

Our ID: hamkits.in@gmail.com

2. Moneybookers. http://moneybookers.com

Our ID:  Name  Digitalconnections   Email digitalconnections.in@gmail.com

Both will be required while sending from your account.

3. ICICI Bank :  Swift Code: ICICINBBCTS
   Our Company Account: Digitalconnections
   A/c Number: 083305000827

KINDLY  VISIT OUR SITE

http://amateurradiokits.in
http://cqbitx.blogspot.com

Select the required kit with amount and pay use that same amount
with the above listed payment options.

We are trying to get the maximum paying options.


We will soon have moneybookers also as option on our ebay shop.

also we are opening a Trade Account worldwide with ICICI Bank. where you can pay the money by a check in our Trade Account.

I request all friends to use the above payment options untill my Paypal issue is resolved.

We are on look out for associates as distributors in various
countries for Bitx 3 and other kits.

Kindly email me at vu3sua@gmail.com for further details.

Many many thanks to the Bitx Family for such a great project.

Best of 73s

DE VU3SUA
Sunil Lakhani

Bitx Version 3 By JOY/YC0NSI

We are glad to post a video as sent by Om JOY/YC0NSI  for his Bitx Version 3 .

Here are the the comments posted by Om JOY/YC0NSI

"Final test using an amplified Astatic Mic for CB..Good reports obtained

even though many said that my voice is more on the treble CB type

quality..Average output is only 2+Watt on voice peak and about 4 Watt

on a whistle test..I have ordered the FLL kit from OM Sunil and I hope

I would be able to obtain a more stable TX/RX frequency..73.. "


JOY/YC0NSI

New Bitx Case

We are working on design for a new Bitx Case. We also have plans to make kits with complete case for some
of our very popular kits like the Bitx,DL4YHF Freq Counter,FLL Kit,40 watts Linear,DDS and the Bitx
multiband tcvr as by G6LBQ.

This year we should see some new products rolled out.

Presented here some designs I made for the Bitx Case. The Bitx case will come in several designs to choose from. and a few colors.

We begin today by publishing designs of case as they are made.

 DESIGNS FOR BITX CASE

 

Frequency Counter 50 Mhz DL4YHF

We had changed the Printed Circuit Board design of the Frequency Counter as by DL4YHF .
The manual we furnish with the kit has details as given by DL4YHF.

Only one extra FND and 10uh RFC have been added . The RFC can be omitted if it gives any false reading
by placing a jumper across.

We are publishing a picture of Freq Counter Build by one of our friends who purchased the kit.

               FREQUENCY COUNTER BUILD :  DESIGN DL4YHF 

New Bitx Version 3 PCB Set

New Stock of Bitx Version 3 PCB are available .

The Linear Cum Power Supply Module PCB  has now a Filter in place for increasing the RF out put above 5 watts in the IRF 510 stage. The details can be found out in the Yahoo Bitx Forum

PICTURES  OF  NEW  BITX  VERSION 3 PCB

MARKS BITX VERSION 3 WITH NPO VFO

Our friend Mark MC Nabb   KF7NCF, has developed a VFO coil that uses NPO tuning.

Mark has build his Bitx version 3 using the NPO COIL .

The details for making a case and NPO as per Marks calculations is given here:

v  The main thing needed will be the aluminum box.  Can you obtain square aluminum
tubing?  I used 1-3/4" square with 1/8" walls but I think we could go
up to 2 or 2-1/2"  without taking up too much space.  

v  The coil form can be  just some plastic tube I had laying around.  It could also just be
a paper wrapped in a circle and then coated with varnish, lacquer, or shellac.

v   The shaft could be any 1/4" plastic rod.  The carrier and
carrier locator strips will just be 1/4" or so plastic sheet.  All
assembly (mounting strips, the ferrite bead, etc) will be done with
hot melt glue.

v  We thank Mark for making this design and we may come up with a small kit that may fit

Inside the Bitx Case.

            

PICTURES OF MARKS BITX WITH NPO VFO    

 

                

                                        

Bitx Multi Band By Om Gabadola from ITALY

The Bitx Multi Band as by G6LBQ is picking up interest among Radio Amateurs as its very easy to build . The ADE-1 Mixer does away with winding coils and MC1350 makes a splendid IF.


Our Friend from Italy Om Gabadola  IZ1NEO   has made his Bitx Multi Band and we are publishing the pictures of his project.


The G6LBQ Multi Band Kit is being worked out and should be available soon for sale.